|
|
Thunder Tiger - JU87 B-2 EP
 |
 click to enlarge |
|
Product No. TTR4340-K21 |
MSRP: $ 139.99 |
| |
Capture the history of WWII with Thunder Tiger's replica
JU87 B-2 EP at your local field. |
| |
| Specification:
Wing Span: 34 " / 863.6 mm
Wing Area: 206.2 sq. in. / 13.3 dm2
Length: 28.43 " / 722 mm
Weight:
17.50 oz. / 500 g.
|
|
Replica of famous World War II fighters. 8 different types of low wing scale planes that you can choose. High performance in flying, can do aerobatics like loop, roll, figure 8, invert, low pass... with ease. Ideal for the next choice after the DGA high wing series. Available in Kit, Kit w/OBL motor and Super Combo.
Features
- State-of-the-art engineering that provide quick and easy assembly
- Pre-painted fuselage and wing
- Standard equipment 4 blade propeller
- Two landing gear designs; fixed and faux retracted
- One piece foam wing with aileron control surface
- Pre-painted WWII pilot included
|
Accessories Needed
- Radio Set - Transmitter (3 channels), x2 micro servos, Mini-Receiver
- Propulsion System - 12A Electronic Motor Controller (Speed Control) for x3 channel radio, 8 cell or
2-3 Li-poly cell battery, Li-poly charger or Field DC quick charger.
- Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers, Mixing sticks for Epoxy, Scissors,Rubbing alcohol, Paper towels, Medium grit sandpaper, Curved Scissors.
|
Parts List
| Part No. |
Description |
Contains |
| AS6608 |
Fuselage |
Firewall-x1, Motor mount-x1, Battery tray-x1, Vertical fin-x1,
Double sided tape-x1, Fuselage (L/1, R/1), M3 Nut-x1, Velcro Sm-x1,
Nut retainer-x1, Velcro Lrg-x1, Mount support-x2, Wing dowel plate-x1,
Wing mount-x1, Servo tray-x1, Cowling mount-x2, Elevator pushrod support-x1 |
| AS6609 |
Wing |
Wing-x1, Wing dowel plate II-x1, Wing bolt-x1, Washer-x1, Protector-x1,
Dowel-x2, Hatch cover (L/1, R/1) |
| AS6610 |
Horizontal Tail |
Horizontal tail-x1, Elevator joiner-x1 |
| AS6611 |
Cowling |
Cowling-x1, 2x8mm wood screw-x1, Engine exhaust-x2 |
| AS6612 |
Canopy |
Canopy-x1 |
| AS6613 |
Landing Gear Door |
Landing gear door (L/2, R/2) |
| AS6614 |
Spinner |
Spinner-x1, Plate-x1 |
| As6457 |
3-Blade Propeller |
Blade-x3, Blade holder-x1 |
| AS6616 |
Pushrod Set |
Elevator-x1, Clevis A-x1 / B-x1, Aileron pushrod-x2 |
| AS6615 |
Aileron Set |
Aileron A (L/1, R/1), B (L/1, R/1) and C (L/1, R/1), Wire-x2, Wire tube-x2 |
| AS6617 |
Hinge |
Hinge A-x16 / B-x16 |
| AS6358 |
Control Horn |
Control Horn-x2, Back plate-x2 |
| AS6412 |
Tail Gear |
Tail gear mount A-x1 and B-x1, Tail gear-x1, Collar-x1, 3x3 mm set screw-x1,
Tail wheel-x1 |
| AS6619 |
Decal |
Decal Set JU87 B-2-x1 |
| AS6620 |
Spinner Adaptor |
2.6x16mm sink screw-x1, M5 nut-x1, 3x3 set screw-x1, Adaptor-x1, Washer-x1 |
| AS6618 |
Landing Gear |
Landing Gear (L/1, R/1), Hex wrench-x1, 3x3 set screw-x2, Collar-x2,
Landing Gear mount A-x2, B-x2 and C-x2 |
| AS6518 |
WWII Pilot |
WWII Pilot-x1 |
| AS6375 |
Ultralite Wheel |
Wheel-x2 |
| AS6380 |
OBL Motor Mount |
OBL motor mount-x1, 3x6mm sink screw-x4, 2.6x8mm wood screw-x4 |
| TTR2354 |
OBl 29/09-07A |
Outrunner Brushless Motor 29/09-07A-x1 / Note: only available with 4340-K21 |
|
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2009 Ace Hobby, Inc.
Not responsible for typographic errors.
|
| 
|
