|
|
Thunder Tiger - F-8F Bearcat EP
 |
 click to enlarge |
|
Product No. TTR4343 |
MSRP: $ 99.99 |
| |
| The F-8F EP is one of the famous "Cat" family of grumman which is simple and clean with outstanding performance in the air. |
| |
| Specification:
Wing Span: 34" / 864 mm
Wing Area: 221.65 sq. in. / 14.3 dm2
Length: 26.75" / 680mm
Weight:
17.50 oz. / 500 g.
|
|
Thunder Tiger proudly introduces one of their finest D.G.A system EP Park Flyers Series to date. This Park Flyer comes with scale four blade propeller, 4:1 geared power unit, prepainted fuselage and wing, furnished scale decal is die-cut ready to apply with ease. Only take you couple hours of enjoyable assembly.
The replica of this great airplane, experience this great warbird, the F-8F Bearcat EP!
Taking the advantage of many lessons learned from carrier duties, the F-8F RP was develop as an interceptor fighter as well as one of the most successful piston engine aircraft to serve with the U.S. Navy towards the end of the WWII.
Features
- State-of-the-art engineering that provide quick and easy assembly
- Pre-painted canopy, fuselage and wing
- Standard equipment 4 blade propeller
- Two landing gear design; fixed and faux retracted
- One piece foam wing with aileron control surface
|
Accessories Needed
- Radio Set - Transmitter (3 channels), x2 micro servos, Mini-Receiver
- Propulsion System - 10A Electronic Motor Controller (Speed Control) for x3 channel radio, 8 cell or
2-3 Li-poly cell battery, Li-poly charger.
- Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers, Mixing sticks for Epoxy, Scissors,Rubbing alcohol, Paper towels, Medium grit sandpaper, Curved Scissors.
|
Parts List
| Part No. |
Description |
Contains |
| AS6365L |
Fuselage |
Fuselage (L/1, R/1), M3 nut-x1, Cowling mount-x2, Velcro-x2,
Pushrod support-x1, Firewall-x1, STD motor mount-x1, OBL motor mount-x1, Motor mount support-x2, Wing dowel plate I-x1, Wing mount-x1, Nut retainer-x1, Servo tray-x1 |
| AS6366L |
Wing |
Main wing-x1, Wing dowel plate II-x1, Wing bolt-x1, Torque retainer-x2, Dowel-x2,
Wing bolt brace-x1 |
| AS6367L |
Horizontal Tail |
CA hinge-x4, Elevator joiner-x1, Horizontal tail/elevator-x1 |
| AS6368L |
Cowling |
Cowling-x1, 2x8mmm wood screw-x2 |
| AS6470 |
Canopy |
Canopy-x1 |
| AS6370L |
Dummy Retract |
Dummy retract (L/1, R/1) |
| AS6467 |
4-Blade Propeller |
Blade-x4, Blade hub-x2 |
| AS6374L |
Pushrod Set |
Elevator pushrod-x1, Aileron pushrod-x2, Clevis A-x1/B-x1,
Torque rod connector-x2, Aileron torque rod (L/1, R/1) |
| AS6375 |
Ultralite Wheel |
Tail gear mount A-x1, Collar-x1, Tail gear-x1, Tail gear mount B-x2, Setscrew-x1,
Tail wheel-x1 |
| AS6468 |
Decal |
Decal A-x1, Decal B-x1, Decal C-x1 |
| AS6469 |
Propeller Adaptor |
Adaptor-x1, M5 nut-x1, M5 washer-x1, 3x3mm set screw-x1 |
| AS6378L |
Landing Gear |
Landing gear (L/1, R/1), Landing gear mount A-x2, mount B-x2, mount C-x2,
Wheel door-x2, Hex wrench-x1, 3x3mm set screw-x2, Collar-x2 |
| Note: Parts shown below vary in version, STD or OBL. |
| AS6353 |
STD Motor |
370 Motor-x1 |
| AS6456 |
STD Motor Mount |
2.6x8mm wood screw-x4, Ball bearing-x2, M3 washer-x2,
3x5mm machine screw-x2, Motor mount-x1 |
| AS6455 |
STD Drive Shaft |
Spur gear/drive shaft-x1, Pinion-x1, E-clip-x1 |
| AS6380 |
OBL Motor Mount |
OBL motor mount-x1, 3x6 sink screw-x4, 2.6x8mm wood screw |
| 2354 |
OBL 2928/09 |
Outrunner brushless motor 2928/09-x1 |
|
|
Also Available
| Description: |
F-8F Bearcat EP OBL |
Product No.: |
TTR4343-K21 |
MSRP: |
$ 139.99 |
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2009 Ace Hobby, Inc.
Not responsible for typographic errors.
|
| 
|
